How to Clean a Commercial or Semi Commercial Coffee Machine

This is a question that has made it to our inbox several times. At Barista Supplies, we understand that there are a number of factors that contribute to creating consistently great coffee, both in store and at home, it’s important to understand the role of cleaning your machine and how it contributes to producing exceptional quality coffee each and every time Cleaning a coffee machine is equally important as buying good quality beans. If your coffee machine is not cleaned regularly you will not only produce poor tasting coffee but also it will shorten the life of the seals and filters. You will only need a few items for cleaning:

Espresso machine cleaner (back flush detergent)
Blind Filter for Group Handle
Cloth
Group Head brush
Steam Wand Brush

To Get Started:

1) Place a spoonful of back flush detergent into a “blind filter” in your group handle.

2) Lock the group handle on the coffee machine and start flushing. Most espresso machine detergents recommend four 15-second start/stop intervals; however check the instructions of the detergent you are using, as it might vary.

3) After you have flushed the detergent through the group head remove the group handle and allow the water to fun for 5 seconds. Rinse out the blind filter to remove any un-dissolved detergent.

4) Lock the group handle back on the machine and repeat the process without any detergent. It is recommended to flush the same amount of times as the detergent phase.

After you have removed all the excess detergent from the blind filter, the next step is to brush the group head and seal. We recommend the Cafetto Group Head Brush as it has water deflector fins to make sure the water doesn’t splash on your hands and has long lasting heat resistant bristles, these are also replaceable.

5) Now it is time to let the water run from the group and start scrubbing the shower screen and all around the seal with the Group Head Brush. This is the best time to use Group Head Brush as the hot running water helps wash away spent grounds, rancid coffee resins, flavours and odours. The benefit of using Group Head Brush is apparent at this stage, as your hands stay cool and dry.

6) Use the microfiber cloth to wipe around the group head and to polish

7) Remove the steam wand tip and use a steam wand brush to clean in the inside of the steam wand. Steam pressure can be affected if they get clogged with dried milk residue (or other debris such as; rust, hard water deposits etc.).

Wipe down the exterior of the espresso machine to remove any surface dirt and reassemble. Please note that it is always a good idea to run three shots of coffee in every head the following morning to season heads. You can also follow the procedures listed below throughout the day:

Flush out water from the group head after every use to get rid of the dirty grind that remains in the filter from the previous coffee (only run water for 3 seconds)
Wipe out group handles with a dry towel before every use
Use the blind filter to back flush the group head every hour
Use the Group Head Brush anytime throughout the day to keep your group head clean and your coffee tasting great
Purge your steam wands before and after milk texturing
Use microfiber cloth to wipe down steam wand after every use